Pre-Order now available!!!

          * NOTE: 8-10 week current build time before product ships *



Pure Fab 09-15 Cadillac CTS-V "BOLT IN" Chromoly Rear Subframe for 9" Solid Axle Conversion


After much testing and adjustments, We have finally released our bolt in rear subframe setup.

This is a completely tested and proven setup we use on our very own CTS-V. 


This setup is designed to bolt in and reuse the same wheel offset you would normally use on the factory IRS setup, It also allows clearance for 15x12 wheels.

If a special axle width is preferred for a custom wheel offset, Please contact us in order to modify the order.


Key Features:

- Made from Chromoly Tubing and Completely Tig Welded

- Bolts directly into the factory rear subframe mounts

- Does not require any cutting of the factory floor

- Utilizes a Parallel 4 Link System

- Many 4 Link Adjustments holes to set the vehicle up for Anti-Squat or Squat settings

- Weight Savings

- If you purchase the complete Rear Subframe/Component Kit, We will assemble/setup and ship it ready to be installed.


Product Notes:

- Must remove the factory fuel tank

- Must remove Evap/Charcoal Canister



Moser Fab 9 Rear Housing


- 35 Spline Axles w/ Pro Flange

- Suspension Brackets

- Rear Back Brace & Bracing

- Mounting Hardware


Moser Pro 9.5" 3rd Member

- Aluminum Thru-Bolt Case

- Steel Spool

- Your choice of gear ratio

- Chromoly Pinion Yoke for 1350 U-Joint 

- "Large" Pinion

- 10-Hole Pro Pinion Support


Please put selected Gear Ratio in order notes.

Gear Ratios:

- 3.25

- 3.40

- 3.50

- 3.60

- 3.89

- 4.11

- 4.29


Moser Rear Drag Brake Kit


- Rotors

- Brake Pads

- Brake Line Plumbing

- Mounting Hardware


Menscer Rear Coilovers & Shock Mounts

- Custom Built & Valved for this Setup

- MonoTube Canister Shock

- Independant Compression and Rebound Adjustments

- Includes Springs

- Includes Shock Mounts 


Chromoly 4 Link Kit & Wishbone

- Designed to fit our Subframe and Rear Housing combination

- Heavy Duty Heim Joints

- Made from Chromoly Tubing and Tig Welded

- Includes Mounting Hardware


Anti-Roll Bar Kit

- Utilizes 1.5” OD x .250” wall 4130 tubing

- Self-Aligning Spherical Bearing Mounts

- Billet Splined 4130 Arms

- Includes Mounting Hardware


09-15 V2 CTS-V 4-Link 9inch Solid Axle Rear Cradle